Polychem® 36 was developed to remove uncured paints, resins, oils and inks
without attacking metals, plastic or glass substrates.
Polychem® 36 has a combination of surfactants, builders and works on a wide variety of
cleaning and flushing applications. The Polychem 36 has no HAP's is non-flammable and biodegradable.
Polychem® 36 has been found to be a direct replacement for materials such as MEK and Xylene in many coating facilities.
Polychem® 36 may be applied by such methods, as wipe on wipe off, spray, immersion, ultrasonics,
and floor scrubbers.

PROPERTIES  
Composition : Bio degradable surfactants and Builders
Biodegradability : Biodegradable surfactants
HAP : Zero
Form : Clear liquid
Odor : Mild
Specific gravity : 0.971
Use concentration : 5% to full strength
Temperature : Ambient - 160°F
PH,use concentration, ASTM E-70 : 10.0 ± 0.2
Water solubility : Complete
Diluent : Water
Rinseability, with water : Free rinsing
   
APPLICATIONS
  • HAND WIPING
  • PRESSURE WASHING
  • DIP WASHING / SOAKING ULTRASONIC CLEANING FLOOR CLEANING
   
Types of Cleaning Applications GUNS, NOZZLES, DISKS, BELLS, SPRAY BOOTHS, PAILS, DRUMS, LIDS, FILTERS, COIL COATINGS AND HARD SURFACES

 

Click here for additional environmental data on all purge solutions







For speed and efficiency the following guidelines are recommended:

     
- Solution reduction range
  1 to 3 parts XS solution to 10 parts water.
(See the PP-15 process tank)
   
- Solution temperature range
  140 to 160 °F supply temperature.
(See the PP-15 process tank)
   
- Solution pressure range
  60 to 100 psi supply pressure.
   
- Purge air pressure range
  60 to 100 psi purge air supply.
     
XS product choices... XS-790 (High pH)...XS-2000 or XS-2000P (Low pH)--
Ask your sales representative for guidance as to the best product for your application