More AcraStrip
Environmental Data

AcraStrip 600 B & G MOD MILITARY

PURGE/CLEANUP SOLUTION FOR Chemical Agent Resistant Coating (CARC)

DESCRIPTION: AcraStrip 600 B&G MOD (MILITARY) is our formula specially designed to purge (chemical agent resistant coating) CARC paints. CARC paints are very resistant to cleaning and until now required toxic products for cleaning and purging. Polychem AcraStrip 600 B & G MOD (MILITARY) is a neutral, completely biodegradable and water dilutable composition designed for flushing paint lines and stripping of particular military specification paints such as urethanes, acrylics, epoxies, waterbornes, and high solids bake enamels. AcraStrip 600 easily cleans electrostatic bells and guns as well as pressure pots and pumps during multiple and rapid color changes.

The active ingredient of Polychem AcraStrip 600 B & G MOD (MILITARY) allows the thorough removal of residual paints during rapid and multiple color changes. Polychem AcraStrip 600 B & G MOD (MILITARY) replaces solvent materials such as MEK, acetone, xylene, toluene and many other solvents used in military painting facilities.

Mark Paul
Phone: 800 431 2072 x360Fax: 845-356-6656

PRODUCT TESTING RESULTS: The following paints have been tested in operational settings and performed to a standard that matched or exceeded solvent purging in that facility.

Mil Spec # Coating Description

Single Component Moisture Cured Top Coat

Water Reducible Type 1 Urethane Top Coat
Type 1 CARC Epoxy Primer
CARC Epoxy Topcoat
2 Component Epoxy CARC Primer
Mil-P-244441 R/19
Zinc Epoxy
Vinyl One Component
Anti-Fouling Copper High Solids Paint Marine Duraplate Epoxy

PROPERTIES: AcraStrip 600 B&G MOD (MILITARY) is completely HAPS free and does not contain of any SARA 313 listed solvents. Polychem AcraStrip 600 B & G MOD (MILITARY) contains only 0.77 lbs/gal VOC at 15% use concentration, which is less than 10% compared to 100% VOC solvents. The technological improvement of surface chemistry coupled with fluid dynamics of AcraStrip 600 B & G MOD (MILITARY) enables it to perform as well as a solvent, but without the toxicity and hazardous waste disposal problems.

Aqueous blend of organic solvents, esters wetting agents
Clear liquid
Specific gravity @20°C:
Flash Point:
None up to its boiling
Use temperature:
Ambient - 130°F
Use concentration:
15% by volume (recommended)