banner
AS600CRR
6ba
6bm
wipes
950
800
750
700

ACRASTRIP 600-BG Mod - (Military)
Solvent Replacement     Biodegradable     HAPS Free     Non-Flammable
PURGE/CLEANUP SOLUTION FOR Chemical Agent Resistant Coating (CARC)

DESCRIPTION: Acrastrip 600 B&G MOD (MILITARY) is our formula specially designed to purge (chemical agent resistant coating) CARC paints. CARC paints are very resistant to cleaning and until now required toxic products for cleaning and purging. Polychem Acrastrip 600 B & G MOD (MILITARY) is a neutral, completely biodegradable and water dilutable composition designed for flushing paint lines and stripping of particular military specification paints such as urethanes, acrylics, epoxies, waterbornes, and high solids bake enamels. Acrastrip 600 easily cleans electrostatic bells and guns as well as pressure pots and pumps during multiple and rapid color changes.

The active ingredient of Polychem Acrastrip 600 B & G MOD (MILITARY) allows the thorough removal of residual paints during rapid and multiple color changes. Polychem Acrastrip 600 B & G MOD (MILITARY) replaces solvent materials such as MEK, acetone, xylene, toluene and many other solvents used in military painting facilities.

Composition:
Aqueous blend of organic solvents, esters wetting agents
Form:
Clear liquid
Specific gravity @20°C:
1.031
Flash Point:
None up to its boiling
Use temperature:
Ambient - 130°F
Use concentration:
15% by volume (recommended)
pH:
Neutral
Biodegradability:
Biodegradable
Diluent:
Water

 
> email Mark Paul

PROPERTIES:
Acrastrip 600 B&G MOD (MILITARY) is completely HAPS free and does not contain of any SARA 313 listed solvents.
Polychem Acrastrip 600 B & G MOD (MILITARY) contains only 0.77 lbs/gal VOC at 15% use concentration, which is less than 10% compared to 100% VOC solvents. The technological improvement of surface chemistry coupled with fluid dynamics of Acrastrip 600 B & G MOD (MILITARY) enables it to perform as well as a solvent, but without the toxicity and hazardous waste disposal problems.

PRODUCT TESTING RESULTS: The following paints have been tested in operational settings and performed to a standard that matched or exceeded solvent purging in that facility.

Mil Spec #

Coating Description

Mil-C-53039

Single Component Moisture Cured Top Coat

Mil-P-64159

Water Reducible Type 1 Urethane Top Coat

Mil-P-53022

Type 1 CARC Epoxy Primer

Mil-PRF-22750

CARC Epoxy Topcoat

Mil-C-53039

2 Component Epoxy CARC Primer

Mil-P-244441 R/19

Zinc Epoxy

N/A

Vinyl One Component

N/A

Anti-Fouling Copper High Solids Paint Marine Duraplate Epoxy

   
(c) 2011 US Polychem