AS600CRR
6ba
6bm
wipes
950
800
750
700

ACRASTRIP 600 CRR READY TO USE or Reducible with Water
     Recylable/Re-usable     Acetone Replacement     Flash point | None     Non-Hazardous

The Polychem Acrastrip® 600 CRR was formulated as a total acetone alternative, providing thorough cleaning of all laminating tools and chop guns with safety, and cost savings in mind. Developed to remove resin, gel coat, adhesive, ink, tar  and urethane. The Acrastrip 600 CRR can easily be recycled through simple filtering reducing the overall use of solvents and making it very economical.  Our Acrastrip line allows for a user friendly environment and  a reduction in hazardous waste.  The Acrastrip is available in liquid form and wipes.  Go Green with Acrastrip.

    ROLLER / TOOL CLEANING
The 600 can be used as is or reduced to 33% with water. The 800 should be used as is. Works well in an Acrabrush machine or in a 5-gallon pail with a grit guard and bag filter.

    INTERNAL MIX GUN FLUSH
Acrastrip 600 or 800 @ 50 PSI or greater into a dump pail with filter bag for eventual re-use.

    RTM / PUTTY RIG/ADHESIVE EQUIPMENT PURGE
Acrastrip 600 or 800 @ 50 PSI or greater into a dump pail with filter bag for eventual re-use.

    MARBLE /SOLID SURFACE
Use the Acrastrip 800 as is or the Acrastrip 600 with defoamer additive in a pot washer

    FINISHING AREA
Use the 600 @ 2-1 with water for non-skid and rail cleaning. Use the 800 with 3 parts water for all lighter cleaning.

    RESIN STRIPPING
Use the 800 as is, the 600 at 1-1 with water and heated to 140°F with full immersion in a dip tank and/or an ultrasonic parts cleaner.


 
> email Mark Paul

 

EPA/Safer Choice recognition does not constitute endorsement of this product. The Safer Choice logo signifies that the product’s formula, as U.S. Polychemical has represented it to the EPA, contains ingredients with more positive human health and environmental characteristics than conventional products of the same type. EPA/Safer Choice relies solely on U.S. Polychemical, its integrity and good faith, for information on the product’s composition, ingredients and attributes. EPA/Safer Choice has not independently identified, that is, via chemical analysis, the ingredients in the product formula, nor evaluated any of U.S. Polychemical's non‐ingredient claims. EPA/Safer Choice provides its evaluation only as to the product’s human health and environmental characteristics, as specified in the Standard and based on currently available information and scientific understanding.

Ingredients CAS No.
Water 7732-18-5
Solvent system proprietary
Alkybenzensulfonic Acid 68584-22-5
Alkyl Benzene-ln 129813-58-7
Sulfuric Acid 7664-93-9
Secondary Alcohol Ethoxylate 84133-50-6
(c) 2011 US Polychem